UNITERS FABRIC & MICROFIBRE CLEANING & STAIN REMOVAL KIT
Cleaning and stain removal kit for fabrics and microfibres
For the cleaning and stain removal of fabrics and microfibres
This kit contains 3 cleaning and stain removal products that can be used on fabric upholstered sofas and chairs. Thanks to their quality and synergy, they effectively remove both general soiling and stains such as juices, food, pen, urine, blood, vomit, lipstick, etc..
The kit consists of:
- 100ml Easy Clean
- 100ml Bye Bye Stain
- 3 x 5g Oxy Cleaner
- 2 soft cleaner
- 1 sponge
Easy Clean
Easy Clean is a very effective detergent for cleaning fabric upholstery, it also removes recent food and beverage stains and eliminates unpleasant odours thanks to its enzyme technology.
Bye Bye Stain
Bye Bye Stain is a product designed to remove resistant stains such as food, beverages, sauces, ballpoint pen and colour transfer.
Oxy Cleaner
Oxy Cleaner has been specially developed to treat stains caused by drink, food, urine, blood, rings and yellowing, etc.
This is the general procedure to follow to clean all the stains
- Before starting the treatment, test the products on a hidden area.
- Apply Easy Clean on a sponge and clean the surface in a gentle circular action.
- If the stain is still present, use Bye Bye Stain, apply on a cloth, dab the stain and gently rub from outside to in.
- For very resistant stains, dab Bye Bye Stain on the stains and leave the product to work for 10-15 minutes.
- If there are rings, use Oxy Cleaner.
Easy Clean
- Shake the bottle well before use.
- Test the product on a hidden area, before starting the treatment.
- Apply the product on a sponge and squeeze it to produce a foam.
- Clean the surface in a gentle circular action. On dirtier areas, dab well with the sponge; when the sponge becomes dirty, rinse it out in clean water. Remove excess foam and residues with a white cotton cloth.
- Let it dry.
To remove odours, spray the product on the affected area, let sit for 5 - 10 minutes. In case of particularly intense odours, maximise the enzyme action by placing a damp cloth on the area after applying the product and keep the area damp for 12 - 24 hours. If the odour persists, repeat the treatment.
Bye Bye Stain
- Shake the bottle well before use.
- Test the product on a hidden area, before starting treatment.
- Pour the product on a soft clean cloth. Dab the stain gently, avoid using too much pressure.
- If necessary, let the product to work for 10-15 minutes.
- Remove the excess product and residues with water.
- Clean with Easy Clean.
- Allow to dry.
Oxy Cleaner
- Dilute 1 sachet of powder in 50 ml of hot water (about 80°C). Stir with a spoon to dissolve the powder.
- Test for colour fastness on a hidden area before use.
- Apply the solution on the stain using a spoon. Dab with a sponge; leave to work for about 20 minutes.
- Blot the stain with an absorbent paper.
- Repeat the application if needed and let dry.